The new 4G Communication Module is a plug-in module, enabling RISCO Control Panels to communicate via 4G/3G networks for reporting, control, and remote programming. It can be used as the primary communication or as backup for the IP and Wi-Fi communication modules. The module supports the SIA/IP, SIA, and Contact ID reporting formats.

The 4G Communication Module is compatible with LightSYS2, ProSYS Plus, Agility4 and is supplied with an antenna.

The 4G Communication Module is also compatible with the COB (Cellular on Bus). With the COB, the 4G Communication Module can be installed along the system bus of a LightSYS or ProSYS Plus alarm system and thus, be placed up to 300 meters away from the control panel.

The Multi-Socket 4G Communication Module supports parallel notification and reporting of events to RISCO Cloud, Monitoring Stations and Follow Me destinations (via email and/or SMS). Voice reports are not supported on 4G LTE.

The 4G Communication Module also supports remote access to the panel using CS for configuration and diagnostics.

The 4G Communication Module is compatible with the following firmware versions:

Agility4 : as of 5.42

LightSYS: as of 6.05

ProSYS Plus: as of 1.4.3.1

Note: Agility4 or LightSYS2 control panels can be upgraded to the current firmware versions as of version 5.xx.